SCHÖNOX Hybrid-Active-Dry-Technology

SCHÖNOX Hybrid-Active-Dry-Technology

The new age has arrived!

SCHÖNOX new H-leveling compounds combine the benefits from cement and gypsum based products:


  • Rapid drying and curing
  • Very low shrinkage
  • Earlier installation of floor coverings

Faster, safer and more efficient! Meet the new H products:


SCHÖNOX® HS 10
(25 kg)
For most of the floorings ready for covering up to 5 mm after 6 hours. Even though the drying speed is fantastic, a pot life of 30 minutes means more than enough time to applicate the material on the floor. As a matter of course the application properties are on a really high level. Maximum layer thickness is 10 mm. SCHÖNOX HS 10 is suitable under all kinds of floor coverings as well as for parquet. It is marked as EC 1PLUS R and it fulfills the Blue Angel criteria. Classified acc. to EN 13813 as CA-C35-F7.

SCHÖNOX® HS 10 F (25 kg)
For most of the floorings ready for covering up to 5 mm after 6 hours. Also here a pot life of 30 minutes means more than enough time to applicate the material on the floor. As a matter of course the application properties are on a really high level. Maximum layer thickness is 20 mm. Due to the fiber content it is predestinated on critical subfloors like e.g. old timber floor boards. SCHÖNOX HS 10 F is suitable under all kinds of floor coverings as well as for parquet. It is marked as EC 1PLUS R and it fulfills the Blue Angel criteria. Classified acc. to EN 13813 as CA-C35-F7.
                                                      
SCHÖNOX® HS 50 (25 kg)
SCHÖNOX HS 50 is ready for covering up to 50 mm after 48 hours. That means as a bonded screed it is the perfect product for renovation. The pot life is as for the other products in the range 30 minutes. Maximum layer thickness is 50 mm. Of course the product is pumpable by using a spiral pump. Also SCHÖNOX HS 10 as well as SCHÖNOX HS 10 F are pumpable. SCHÖNOX HS 50 is suitable under all kinds of floor coverings as well as for parquet. It is marked as EC 1PLUS R and it fulfills the Blue Angel criteria. Classified acc. to EN 13813 as CA-C35-F10.

Print